4 x $798.49
From $10
Since starting Adventure Kings we have offered enthusiasts great products at affordable prices. Sounds too good to be true, right? So how do we do it? It's actually very simple. We remove the middlemen. That's it! By reducing the supply chain, this allows us to charge less and still maintain top quality products!
Grand Tourer MkIII Aluminium Rooftop Tent
Four-Stage Water Ingress Protection | 30sec SETUP | 75MM Mattress
Canvas zippered doors
Integrated awning system
Internal loops
Ultra tough Extruded Aluminium Frame
External gas struts
Awning window poles
320GSM polycotton canvas
2.3m heavy-duty telescopic ladder
Heavy-duty handles
Midgee-proof flyscreen
Heavy duty lock out pole
4 internal storage pockets
Over-centre latches
75mm high-density foam mattress
Removable & washable mattress cover
Removable carpeted floor
Cable access points
THE NEW PLATINUM STANDARD IN CAMPING ACCOMODATION
The Adventure Kings Grand Tourer MkIII Aluminium Rooftop Tent has had a ground up redesign to make it a camper’s best friend. With a genuine 30-second setup this highly customisable beauty is jam packed full of features. 4-stage water ingress protection will ensure your gear stays high and dry when locked inside.
CREATURE COMFORTS
Take the comfort of your bed at home with you anywhere! Boasting a huge sleeping space plus an incredibly comfy 75mm thick mattress, it’s the rooftop tent that’ll make you the envy of campers everywhere! The Grand Tourer MkIII comes with four internal storage pockets plus a cable access point on both sides to make running power up into your rooftop tent simple, clean, and easy!
GENUINE 30-SECOND SETUP
Kick back and watch the sunset in no time. The Grand Tourer MkIII can be fully set up with just one person in under a minute. Thanks to the external gas struts rated to 550 newtons, which do all the work for you. To setup simply pop the latches, give the heavy-duty handles a light push and the gas struts will take over.
FOUR STAGE WATER INGRESS PROTECTION
Stay high and dry with four stages of water protection. 1) The sleek design with no external rivet or bolt joints, reduces risk of water ingress via holes. 2) An automotive grade rubber pinch weld seal keeps water and dust out for good. 3) A custom extrusion aluminium prevents water coming inside the tent even if the water passes the rubber seal. 4) Every join is sealed with automotive grade polyurethane sealant, making the Grand Tourer MKIII extremely watertight and built for extreme weather.
BUILT FOR THE EXTREMES
An all-new aluminium honeycomb sandwich panel system has been integrated into the frame for an incredible amount of strength and durability. The new custom-designed, extruded aluminium frame has allowed us to drastically increase the strength of the Grand Tourer MkIII while making the overall dimensions incredibly compact. The external gas struts, along with the nuts and bolts in the included DIY fitting kit are ultra-high quality 316 marine grade stainless steel- A must have if you live near the coast or love to hit the beach.
SLEEPING IN LUXURY
Huge sleeping area! 1300mm wide by 2145mm Long- Almost as wide as a double bed and longer than a king! Getting changed is a breeze with a whopping 1.65m of head height. Leave all your bedding gear inside with an internal space of 110mm when closed. You’ll feel at home with the 75mm high density foam mattress, fitted with a soft quilted top that can be zipped off and removed for machine washing.
INSULATED FLOOR & ROOF
The aluminum honeycomb sandwich panel that is built into the frame of the roof and ceiling doubles as insulation, keeping you cool in summer and cosy warm in winter. The Grand Tourer MkIII also features a removable carpeted floor for easy cleaning.
A CAMPER’S DREAM
The Grand Tourer MkIII uses durable 320GSM canvas. You’ll sleep tight and the bed bugs wont bite with all three sides featuring zippered midge and mozzie proof flyscreen mesh which will stop the bugs, but not the breeze. All 3-entry points zip from the bottom and can be sheltered from the rain with the integrated awning system- allowing for excellent airflow, no matter what the weather is doing. The awnings are held in place by incredibly strong tension poles which allow the awning to flex in the wind without flapping around and making noise, ensuring you sleep tight all night long.
THREE-SIDED ACCESS
Customise your setup by relocating the ladder mounts to any of the 3 door options! Enter one of these doors using the included heavy-duty telescopic ladder which extends to over 2.3m- Perfect for just about any sized rig! The 80mm deep anodised angled ladder rungs make climbing into bed incredibly easy on your feet. The Grand Tourer MkIII is truly customizable making it ideal for all your camping needs.
COMPLETELY CUSTOMISABLE
Full length accessory channels built into the extruded aluminium frame make mounting optional accessories like awnings, shower tents and even a shovel so incredibly easy.
MEASUREMENTS & DIMENSIONS
When closed, the Grand Tourer MkIII measures 2261mm long, by 1415mm wide, by 264mm high, and weighs 95kg including the mattress, telescopic ladder, fitting kit, awning poles and the heavy duty lock out pole.
EVERYTHING YOU NEED TO INSTALL
The Grand Tourer Mk3 comes with an included ultra-heavy-duty mounting kit, with six powder coated mounting plates, 12 x mounting track adaptors & 12 x M8 marine grade stainless steel nylock nuts and bolts. The perfect addition to just about any flat roofrack out there!
OPTIONAL GENUINE ACCESSORIES
Add a set of genuine awning mounts to any of the accessory rails to mount an awning or Instant Ensuite directly to your Grand Tourer MkIII- Including the amazing 270° King Wing and King Wing Deluxe wrap-around style awnings. Or bolt on a set of the optional genuine roof crossbars to increase load carrying ability or mount a solar panel on top!
PLEASE NOTE
Ensure that the combined weight of the RTT & the roof rack is lower than the vehicle roof load limit. Consider that off-road travel increases the dynamic stresses on your vehicle.
Dimensions
Kings Plus 270° Tourer Freestanding Awning MKII
9.4sqm Shade | 280GSM Canvas | Perfect For Wagons and Camper Trailers
Heavy Duty Arms
Canvas securing straps
PVC Material
Cam buckle strap
Tie-down D-Ring
Zippers
Sewn in Kings Logo
280gsm Ripstop Canvas
Pivoting hinge
TOUGH AND RUGGED ALUMINIUM CONSTRUCTION
The Adventure Kings 270° Tourer Freestanding Awning MKII is the next evolution in the legendary Freestanding Awning range! Designed and built with the same heavy-duty powder-coated aluminium frame as the first-generation 270° Freestanding Awning, you can easily set up your campsite shade in under a minute!
COMPLETE FREE-STANDING DESIGN
With a pole-free setup, the Adventure Kings 270° Tourer Freestanding Awning MKII lets you move around your campsite without worrying about tripping over guy ropes or hidden ground pegs. It’s the ultimate choice for hassle-free shelter.
PREMIUM QUALITY CANVAS
The high-quality 280GSM ripstop canvas will always keep you dry, and the UPF50+ rating ensures you're protected from both the harsh sun and rain.
UNIQUE IN-HOUSE DESIGNED PIVOT HINGE
Re-designed with practicality in mind, the Kings 270° Tourer Freestanding Awning MKII features the same heavy-duty powder-coated aluminium frame as the rest of the range, along with improved stiffeners and pivoting hinge. This reinforced design provides better support, keeping your awning steady and secure.
CONVENIENT AND VERSATILE ACCESSORIES
With each side of the awning extending 2.5 metres, the 270° Tourer Freestanding Awning MKII offers great versatility. You can easily attach any of the Adventure Kings Plus Freestanding Universal Awning Walls or Walls with Doors to any side, giving you the flexibility to customise your setup as needed. This adaptability makes the Tourer 270° a great choice for outdoor enthusiasts.
ADDED PEACE OF MIND
The 270° Tourer Freestanding Awning MKII is designed with weather in mind, featuring awning straps and pegs to help keep it secure during rough conditions.
Mounting Kits sold separately.
Kings Freestanding Awnings can only be mounted on the passenger side of a vehicle.
Kings Freestanding Awning to Grand Tourer Mk3 Brackets
Inc. GT3 Awning Pole Bracket Adapter Plates + Mounting Hardware
THE PERFECT FREESTANDING AWNING MOUNTING SYSTEM!
THE PERFECT FREESTANDING AWNING MOUNTING SYSTEM! This quality all-in-one kit here lets you easily mount the Kings 270° Freestanding Awning directly to the side of your Grand Tourer Mk3 aluminum rooftop tent! It uses ultra-strong brackets that attach to the Grand Tourer Mk3’s side and rear accessory channels to provide a sturdy mounting option for your Kings Freestanding Awning.
EASY BOLT-ON DIY INSTALL
No drilling or cutting needed - these brackets simply bolt straight onto the Grand Tourer Mk3! The brackets come with a full set of high-tensile stainless steel mounting hardware, and installs with only basic hand tools. Plus, the kit comes with clear, easy-to-follow instructions, and installation only takes approx. 1 hour.
BUILT TOUGH TO GO THE DISTANCE
This is one seriously tough set of brackets too! They’re made from stainless steel for longevity and looks, and all fitting hardware is high-tensile stainless steel.
SLIMLINE DESIGN FOR REDUCED WIND RESISTANCE
The Kings Freestanding Awning to Grand Tourer Mk3 Brackets have been computer-designed to position your awning snugly up against the side of your Grand Tourer Mk3. This has the advantage of a smaller overall profile, keeping your awning tucked nicely in against the rooftop tent for lower wind resistance while travelling and better protection from rain while camping.
BOLTS TO THE BACK OF ANY KINGS AWNING
This heavy-duty folded stainless steel bracket simply bolts to the mounting channel on the back of any style of Kings awning, from regular pull-out awnings, right up to the incredible 270° Freestanding Awning. It then gives you the ability to raise the Grand Tourer’s awning mount higher to avoid clearance issues.
TWIN-PACK KIT INCLUDES ALL REQUIRED MOUNTING HARDWARE
In the kit you get two of the mounting brackets, plus all required stainless steel M8 mounting hardware. Most campers will only require one plate, with the second supplied plate giving you additional mounting options for other awning or accessory configurations.
Please note
Designed specifically to suit Grand Tourer Mk3 rooftop tent and Kings 270° Freestanding awning.
Australian Owned & Operated Company
Buy Now, Pay Later
