No-one wants to wait at the servo to air up… and why would you when you can have a super powerful 160L per minute Thumper Air Compressor ready to go in your vehicle. Featuring a massive 160L per minute high pressure output, heavy duty 60mm alloy piston, tough alloy chassis, pressure release safety valve, 8m of heavy duty high pressure hose with quick connect fitting and easy connect tyre chuck included.
The Thumper Air Compressor has been tried and tested all over Australia in the harshest and most unforgiving conditions, and no matter what you throw at it, the Thumper MKIII is up to the challenge. Able to inflate five 31in 4WD tyres in just over 11 minutes, you can pull off the tough tracks, air up, and you’re half way home while other 4WD owners are still stuck at the servo!
Ideal for the 4WD, camper trailer, caravan and bikes, you can even use the Thumper MKIII to inflate sporting equipment and air mattresses thanks to the included adapters.
NEW DESIGN – Better than the original Thumper and MKII, the Thumper MKIII has an upgraded aluminium alloy cylinder head that is bigger and faster, plus upgraded chassis for increased strength and cooling.
HEAVY-DUTY – Made for real 4WDing! With rugged body, heavy-duty power cables and an 8m heavy duty rubber hose with inline pressure gauge and easy to use tyre chuck.
FAST – 160L of air per minute, and a maximum pressure of 150PSI, the Thumper MKIII will completely inflate a 35in tyre from 0PSI to 30PSI in 3 min 25 sec.
EASY – New quick-connect chuck fitting allows for instant connection to tyre valves thanks to spring-loaded locking design.
*Bag Sold Seperately
Dimensions: |
340mm long x 230mm high x 150mm wide |
|
Weight: |
7.1kg |
|
Cylinder: |
60mm |
|
Voltage: |
DC 12V |
|
Air Flow: |
160L/min |
|
Maximum pressure: |
150PSI |
|
Maximum amperage: |
45A |
|
Heavy duty rubber hose: |
8m Inline pressure gauge |
|
Maximum voltage: |
13.8V |
|
Maximum amp draw: |
45A |
|
Maximum restart pressure: |
150PSI |
|
Maximum operating temperature: |
60°C |
|
Minimum operating temperature: |
-57°C |
|
33” Tyre |
10 PSI to 32 PSI |
2 min 23 sec |
35” Tyre |
10 PSI to 32 PSI |
2 min 32 sec |
35” Tyre |
0 PSI to 30 PSI |
3 min 25 sec |
33” Tyre |
10 PSI to 32 PSI |
2 min 28 sec |
35” Tyre |
10 PSI to 32 PSI |
2 min 44 sec |
35” Tyre |
0 PSI to 30 PSI |
3 min 58 sec |
No-one wants to wait at the servo to air up… and why would you when you can have a super powerful 160L per minute Thumper Air Compressor ready to go in your vehicle. Featuring a massive 160L per minute high pressure output, heavy duty 60mm alloy piston, tough alloy chassis, pressure release safety valve, 8m of heavy duty high pressure hose with quick connect fitting and easy connect tyre chuck included.
The Thumper Air Compressor has been tried and tested all over Australia in the harshest and most unforgiving conditions, and no matter what you throw at it, the Thumper MKIII is up to the challenge. Able to inflate five 31in 4WD tyres in just over 11 minutes, you can pull off the tough tracks, air up, and you’re half way home while other 4WD owners are still stuck at the servo!
Ideal for the 4WD, camper trailer, caravan and bikes, you can even use the Thumper MKIII to inflate sporting equipment and air mattresses thanks to the included adapters.
NEW DESIGN – Better than the original Thumper and MKII, the Thumper MKIII has an upgraded aluminium alloy cylinder head that is bigger and faster, plus upgraded chassis for increased strength and cooling.
HEAVY-DUTY – Made for real 4WDing! With rugged body, heavy-duty power cables and an 8m heavy duty rubber hose with inline pressure gauge and easy to use tyre chuck.
FAST – 160L of air per minute, and a maximum pressure of 150PSI, the Thumper MKIII will completely inflate a 35in tyre from 0PSI to 30PSI in 3 min 25 sec.
EASY – New quick-connect chuck fitting allows for instant connection to tyre valves thanks to spring-loaded locking design.
*Bag Sold Seperately
Dimensions: |
340mm long x 230mm high x 150mm wide |
|
Weight: |
7.1kg |
|
Cylinder: |
60mm |
|
Voltage: |
DC 12V |
|
Air Flow: |
160L/min |
|
Maximum pressure: |
150PSI |
|
Maximum amperage: |
45A |
|
Heavy duty rubber hose: |
8m Inline pressure gauge |
|
Maximum voltage: |
13.8V |
|
Maximum amp draw: |
45A |
|
Maximum restart pressure: |
150PSI |
|
Maximum operating temperature: |
60°C |
|
Minimum operating temperature: |
-57°C |
|
33” Tyre |
10 PSI to 32 PSI |
2 min 23 sec |
35” Tyre |
10 PSI to 32 PSI |
2 min 32 sec |
35” Tyre |
0 PSI to 30 PSI |
3 min 25 sec |
33” Tyre |
10 PSI to 32 PSI |
2 min 28 sec |
35” Tyre |
10 PSI to 32 PSI |
2 min 44 sec |
35” Tyre |
0 PSI to 30 PSI |
3 min 58 sec |
Facebook
Adventure Kings Gear
Instagram
@adventurekingsgear
Get all the latest information on Events, Sales and Offers. Sign up for newsletter today.