Double your shade and shelter for a fraction of the cost of a new awning. Fits most side awnings regardless of brand. 100% waterproof, UPF 50+ rated, 2.9m long by 2.5m wide.
Quick and easy to setup, all you need to do is either thread the top edge into the track at the end of your awning or use the stitched-in Velcro loops to fit it to either side, then peg it out through the three reinforced stainless steel eyelets on the bottom edge to increase your shade and shelter!
Designed to work with almost any side awning regardless of brand or size it’s the perfect upgrade for your camping setup, plus it’s made from the same proven and durable 170GSM ripstop polyester as our awnings – and you can rest easy knowing that they’re both UPF50+ rated and fully waterproof.
Whether you want to keep out of the hot sun, or stop the rain getting into your campsite (even if it’s coming down sideways!) an Adventure Kings Awning Wall is a necessity to make the most of your Awning.
One of the best parts about adding an Awning Wall to your camp setup is that it packs down into an easy-to-transport size that can be stored neatly in your vehicle for whenever it’s needed.
This very affordable shade solution is the perfect addition to an Adventure Kings awning. Perfect for long stays in the same spot, or a quick bit of sun protection while at the beach or watching kids’ sport – it will change the way you camp.
*Side awning sold separately
Dimensions: |
2.5m wide x 2.9m high |
Versatile mounting system: |
Thread the 2.5m top side along the runner at the end (furthest point from the 4WD) of a 2x2.5m OR 2.5x2.5m awning. Or, use the side wall’s adjustable straps to secure it to the metal support arms along the side of a 2x2.5m, 2.5x2.5m OR 2x3m awning (the poles that run at right angles to the vehicle) |
Includes: |
Pegs, and 3 stainless steel ‘O’ rings with reinforcement |
HOW DOES IT SECURE TO THE AWNING?
The Awning wall has both a sail track edge and Velcro straps so that it can attach to both the front edge and side of an Adventure Kings awning.
ARE THERE DIFFERENT SIZES?
There is only one size available 2500mm along the awning and 2900mm from the awning to the ground. This means it will suit both the front and sides of a 2.5x2.5 awning and will suit the sides of a 2x2.5m or 2x3m awning.
CAN I USE TWO OR THREE AWNING WALLS?
Yes, all sizes of side awnings can support two walls – one on each side, while the 2.5x2.5 awning can support one on each side and one on the front.
ARE THEY WATERPROOF?
Yes, they’re waterproof and offer UP50+ sun protection – the highest possible rating
SKU | AKTA-AWN_WALL_2.5 |
---|---|
Manuals and Documentation | No |
Double your shade and shelter for a fraction of the cost of a new awning. Fits most side awnings regardless of brand. 100% waterproof, UPF 50+ rated, 2.9m long by 2.5m wide.
Quick and easy to setup, all you need to do is either thread the top edge into the track at the end of your awning or use the stitched-in Velcro loops to fit it to either side, then peg it out through the three reinforced stainless steel eyelets on the bottom edge to increase your shade and shelter!
Designed to work with almost any side awning regardless of brand or size it’s the perfect upgrade for your camping setup, plus it’s made from the same proven and durable 170GSM ripstop polyester as our awnings – and you can rest easy knowing that they’re both UPF50+ rated and fully waterproof.
Whether you want to keep out of the hot sun, or stop the rain getting into your campsite (even if it’s coming down sideways!) an Adventure Kings Awning Wall is a necessity to make the most of your Awning.
One of the best parts about adding an Awning Wall to your camp setup is that it packs down into an easy-to-transport size that can be stored neatly in your vehicle for whenever it’s needed.
This very affordable shade solution is the perfect addition to an Adventure Kings awning. Perfect for long stays in the same spot, or a quick bit of sun protection while at the beach or watching kids’ sport – it will change the way you camp.
*Side awning sold separately
Dimensions: |
2.5m wide x 2.9m high |
Versatile mounting system: |
Thread the 2.5m top side along the runner at the end (furthest point from the 4WD) of a 2x2.5m OR 2.5x2.5m awning. Or, use the side wall’s adjustable straps to secure it to the metal support arms along the side of a 2x2.5m, 2.5x2.5m OR 2x3m awning (the poles that run at right angles to the vehicle) |
Includes: |
Pegs, and 3 stainless steel ‘O’ rings with reinforcement |
HOW DOES IT SECURE TO THE AWNING?
The Awning wall has both a sail track edge and Velcro straps so that it can attach to both the front edge and side of an Adventure Kings awning.
ARE THERE DIFFERENT SIZES?
There is only one size available 2500mm along the awning and 2900mm from the awning to the ground. This means it will suit both the front and sides of a 2.5x2.5 awning and will suit the sides of a 2x2.5m or 2x3m awning.
CAN I USE TWO OR THREE AWNING WALLS?
Yes, all sizes of side awnings can support two walls – one on each side, while the 2.5x2.5 awning can support one on each side and one on the front.
ARE THEY WATERPROOF?
Yes, they’re waterproof and offer UP50+ sun protection – the highest possible rating
SKU | AKTA-AWN_WALL_2.5 |
---|---|
Manuals and Documentation | No |
Facebook
Adventure Kings Gear
Instagram
@adventurekingsgear
Get all the latest information on Events, Sales and Offers. Sign up for newsletter today.